As the owner of a CBR1000RR, you’re probably always looking for ways to make your bike go faster. But what about making it go slower? While that may not sound as exciting, there are actually a few good reasons to lower your CBR1000RR.

Doing so can improve the handling of your bike, make it easier to wheelie, and even help you keep the front end down in hard braking situations. Plus, it just looks cooler. If you’re interested in lowering your CBR1000RR, here are a few things you should know.

  • There are a few things you can do to lower your CBR1000RR: 1
  • Adjust the preload on your rear shock
  • This will lower the back end of the bike, and is a good place to start
  • Swap out your front forks for a set that have less travel
  • This will lower the front end of the bike
  • Install shorter handlebars
  • This will lower your body position on the bike, making it feel lower overall
  • Lowering links are available for most bikes, and they will lower the rear suspension by changing the leverage ratio
  • This is more involved than simply adjusting preload, but can be worth it if you’re looking to get your bike as low as possible

04-07 CBR1000RR Lowering Link Install (CBR600RR)

Can you lower CBR1000RR?

If you’re looking to lower your CBR1000RR, there are a few things you’ll need to do. First, you’ll need to adjust the preload on your rear shock. This will lower the back end of the bike and give you a bit more ground clearance.

Next, you’ll need to install a lower seat. This will help get your legs in a better position for cornering. Finally, you can install shorter handlebars.

This will help with weight distribution and make it easier to maneuver the bike at low speeds.

How do you lower the front of a CBR?

If you’re looking to lower the front of your CBR, there are a few different ways you can go about it. One option is to adjust the preload on your forks. This will lower the front of the bike by decreasing the distance between the top of the fork tube and the bottom of the triple tree.

Another option is to install a lowering kit, which will replace your stock fork springs with shorter ones. This will also lower your bike’s front end. Finally, you can install a set of lowering blocks on your rear shocks.

This will reduce how much travel they have, which in turn will lower the back end of your motorcycle.

How fast does a CBR1000RR go in first gear?

Assuming you are asking about the Honda CBR1000RR, it has a top speed of 190 mph in first gear. The 0-60 mph time is 3.1 seconds.

How many miles can you get out of a CBR1000RR?

Assuming you are asking about the Honda CBR1000RR, it depends on a few factors. Generally speaking, you can expect to get between 10,000 and 15,000 miles out of the bike before needing any major maintenance or repairs. However, if you ride hard and put a lot of stress on the engine, you may need to do some work sooner.

Additionally, if you don’t maintain your bike properly, it will also affect how long it lasts.

how to lower cbr1000rr


Cbr 1000rr

The CBR 1000RR is a sport bike made by Honda. It was introduced in 2004 as the 7th generation of the CBR series of motorcycles. The CBR 1000RR is powered by a 999cc inline four-cylinder engine and it can reach speeds of over 200 mph.

It has a six-speed gearbox and weighs around 200 kg.

2008 cbr1000rr

2008 CBR1000RR The 2008 CBR1000RR was a completely new design from Honda. It featured an all-new 999cc inline four engine, chassis, and bodywork.

The CBR1000RR was significantly lighter than the previous generation model, with a dry weight of 414 lbs. The engine produced 168 hp at 12,000 rpm and 82 ft-lbs of torque at 8500 rpm. The CBR1000RR chassis was designed to provide excellent stability and handling.

The bike featured 43mm inverted forks up front, and a Pro-Link rear suspension system. With its dual 310mm front brake discs and single 220mm rear disc, the CBR1000RR had great stopping power. The 2008 CBR1000RR was one of the best sportbikes on the market, providing riders with incredible performance and handling.

If you’re looking for a used sportbike that won’t break the bank, the CBR1000RR should be at the top of your list!

Cbr600rr lowering link install

If you’re looking to lower your CBR600RR, you’ll need to install a lowering link. Lowering links are designed to lower the rear of your bike, giving it a more aggressive stance. They also improve cornering clearance and make it easier to tuck in during high-speed riding.

Installing a lowering link is not a difficult task, but there are a few things you’ll need to keep in mind. First, you’ll need to remove the rear shock absorber. This is usually held in place by two bolts at the top of the shock.

Once these are removed, the shock can be pulled out from the bottom. Next, loosen the nut that secures the swingarm pivot bolt. This will allow you to slide the old lowering link out and install the new one.

Be sure to use anti-seize compound on all threads before tightening everything back up. Once the newlink is installed, simply reverse the process to reinstall the rear shock absorber. That’s all there is to it!


In order to lower your CBR1000RR, you will need to adjust the preload on the rear shock. You can do this by turning the adjusting knob located on the bottom of the shock. Turning it clockwise will increase preload, and turning it counterclockwise will decrease preload.

You will also need to adjust the rebound damping on the front forks. The rebound damping is adjusted by turning the knob located on top of each fork leg. Turning it clockwise will increase rebound damping, and turning it counterclockwise will decrease rebound damping.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *